TMPS 10-115

AC/DC Power Supply • Ultra Compact 10 Watt PCB Power module in 1" x 1.5" package • Certified to IEC/EN 60335-1 and UL 62368-1 for household and industrial appliance • • Reinforced I/O isolation 4000 VAC • • Allows 130% peak current up to 30 s • EMI meets EN 55032 class B and EN 55014-1 • • Protection class II prepared TMPS 10 Series, 10 Watt Operating temperature range –25°C to +70°C Ready to meet ErP directive, < 0.15 W no load power consumption 3-year product warranty UL 62368-1 IEC 60335-1 IEC 62368-1 The TMPS 10 series comprises ultra compact AC/DC power supply modules in a lightweight fully encapsulated plastic casing for PCB mount. Beside the latest safety approvals for industrial and IT solutions (IEC/EN/UL 62368-1), they are also certified to IEC/EN 60335-1 for household appliance. These 10 Watt modules are the ideal solution for low power or segregated circuits when space is critical or for an efficient powering of a standby mode when compliance to ErP directive is required. A peak current of 130% facilitates the activation of main circuits. Models Order Code Output Power max. nom. max. peak typ. TMPS 10-103 8.6 W 3.3 VDC 2'600 mA 3'380 mA 77 % TMPS 10-105 5 VDC 2'000 mA 2'600 mA 80 % TMPS 10-109 9 VDC 1'100 mA 1'440 mA 83 % 12 VDC 830 mA 1'080 mA 84 % 15 VDC 660 mA 860 mA 84 % TMPS 10-124 24 VDC 410 mA 530 mA 86 % TMPS 10-148 48 VDC 210 mA 270 mA 84 % TMPS 10-112 TMPS 10-115 www.tracopower.com 10 W Output Voltage Output Current September 20, 2023 Output Current Efficiency Page 1 / 4 TMPS 10 Series, 10 Watt Input Specifications Input Voltage - AC Range Operational Range: Rated Range: Operational Range: Polarity: Operational Range: Certified: - DC Range Input Frequency Power Consumption Input Inrush Current - No load & Vin = 230 VAC - No load & Vin = 115 VAC - At 230 VAC - At 115 VAC Recommended Input Fuse 85 - 264 VAC (Full Range) 100 - 240 VAC (Full Range) 120 - 370 VDC (Designed for, no certification) irrelevant 47 - 440 Hz 50/60 Hz 450 mW max. 150 mW max. 40 A max. 20 A max. 1'600 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Boost Power Ripple and Noise (20 MHz Bandwidth) 3.3 VDC model: 5 VDC model: 9 VDC model: 12 VDC model: 15 VDC model: 24 VDC model: 48 VDC model: 3.3 VDC model: 5 VDC model: 9 VDC model: 12 VDC model: 15 VDC model: 24 VDC model: 48 VDC model: Capacitive Load Minimum Load Temperature Coefficient Hold-up Time - At 230 VAC - At 115 VAC Short Circuit Protection Overload Protection Output Current Limitation Overvoltage Protection ±2% max. 0.5% max. 1% max. Output Current peak: See model table Peak power time: 30 s max. Peak power duty cycle: 10% max. Average operation power: 10 W max. 60 mVp-p max. 60 mVp-p max. 90 mVp-p max. 120 mVp-p max. 150 mVp-p max. 240 mVp-p max. 480 mVp-p max. 4'400 µF max. 2'200 µF max. 680 µF max. 390 µF max. 240 µF max. 100 µF max. 24 µF max. Not required ±0.02 %/K max. 40 ms min. 8 ms min. Continuous, Automatic recovery Foldback Mode 150% typ. of Iout max. 125% typ. of Vout nom. (By Zener diode) Safety Specifications Safety Standards - IT / Multimedia Equipment - Household - Certification Documents Protection Class EN 62368-1 IEC 62368-1 UL 62368-1 EN 60335-1 IEC 60335-1 www.tracopower.com/overview/tmps10 Class I & II (Prepared): Reinforced Insulation All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TMPS 10 Series, 10 Watt Pollution Degree Over Voltage Category PD 2 OVC II EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions - Harmonic Current Emissions - Voltage Fluctuations & Flicker EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge L to L: - Conducted RF Disturbances - PF Magnetic Field - Voltage Dips & Interruptions Continuous: 230 VAC / 50 Hz: EN 55014-1 (internal filter) EN 55032 class B (internal filter) FCC Part 15 class B (internal filter) EN 55014-1 (internal filter) EN 55032 class B (internal filter) FCC Part 15 class B (internal filter) EN 61000-3-2 EN 61000-3-3 EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 55014-2 (Household Appliances Tools) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 30 A/m, perf. criteria A EN 61000-4-11 30%, 25 periods, perf. criteria A >95%, 0.5 periods, perf. criteria A >95%, 250 periods, perf. criteria B General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Approved Ambient Temp. - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Leakage Current Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Soldering Profile - Input to Output, 60 s - Input to Output, 500 VDC - Touch Current - Calculated MTBF 95% max. (non condensing) –25°C to +70°C +50°C max. +95°C max. –40°C to +85°C 2.5 %/K above 50°C See application note: www.tracopower.com/overview/tmps10 Natural convection (20 LFM) 2'000 m max. 30 - 65 kHz (PWM) 45 kHz typ. (PWM) Reinforced Insulation 244 VAC 4'000 VAC 1'000 MΩ min. 250 µA max. 453'000 h (MIL-HDBK-217F, ground benign) Not allowed Plastic resin (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) Lead-Free Wave Soldering 260°C / 10 s max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TMPS 10 Series, 10 Watt Weight 29 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) ff22f0cd-e618-4e40-a6d5-fcf29f17a993 Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmps10 Outline Dimensions 25.4 (1.00) Pin Connections 2.54 (0.10) 1 33.02 (1.30) 38.5 (1.52) 2 Pin Function 1 AC (N) 2 AC (L) 3 –Vout 4 +Vout Bottom view 4 2.74 (0.11) 3 2.54 (0.10) 1.00 ( 0.04) 19.05 (0.75) 5.08 (0.20) 12.70 (0.50) 15.74 (0.62) Dimensions in mm (inch) Outside dimension tolerance: ±0.5 (±0.02) Pin pitch tolerance: ±0.25 (±0.01) Pin diameter Ø: 1.0 ±0.1 (0.04 ±0.004) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4